PORSCHE 944 CARRERA WING
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
This harness mount was developed in response to customer requests for a truss-style harness mount for the Porsche 996 coupe. The new 846 r1035 features water-jet machined aluminum construction much like our 846 r1025 harness truss. Like all brey-krause harness mounts, the 846 r1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats.
The 846 r1035 been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev.mar 95, motor vehicle seat belt anchorages-performance requirements...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
$1,638.45
Make a selection
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
Stoptech big brake kit rear slotted black caliper Porsche 996 Carrera 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that op...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05
$2,694.60
Make a selection
Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.
Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)
General Fitment 911 1998-05
$5,021.93
Make a selection
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.
Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)
General Fitment 911 1989-94
$5,021.93
Make a selection
Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.
Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)
General Fitment 911 1989-94
$4,635.63
Make a selection
Gruppe m ram air intake system Porsche 964 Carrera 88-93
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped ...(choose a part on the right to read more)
General Fitment 911 1987-89
$2,175.08
Make a selection
Product details:
High-flowing, direct bolt-on replacement for the bulky & restrictive factory catalytic converters, gaskets included.
Features:
-fits all Porsche 911 Carrera vehicles (1976-1989)
-constructed from high quality mandrel bent t304 stainless steel
-less back pressure and improved throttle response
-high flow sport race cat for maximum flow and power
-includes integrated o2 sensor bung for fuel-injected cars
-direct replacement bolt-on for stock cat or cat bypass pipe
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
Note: fabspeed’s 200-cell high-flow catalytic...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89
From $595.00
Make a selection
Product details:
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design
Features:
-fits all Porsche 911 Carrera vehicles 1976-1989
-very aggressive muffler bypass system which incorporates two resonators. Recommended for track use only!
-dramatic weight savings and improvement in power
-single outlet design
-very aggressive muffler bypass system which incorporates two resonators
-direct replacement for the OEM muffler and will bolt to the factory catalytic converter
-complete t304l stainless steel construction; 14-16 gauge cnc mandrel-be...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design
Features:
Improves exhaust flow and sports car sound
Adds 15 whp greatly improving throttle response
Saves 11 bs from rear of car
Optimized for use at high-rpm during track and motorsport events
Complete t304l stainless steel construction; 14-16ga cnc mandrel-bent 2.25 tubing
Direct replacement for the factory mufflers
Includes removable turndowns that are easy on & easy off for lowering the exhaust volume when desired
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,095.00
Make a selection
Fabspeed's performance package for the 991 Carrera vehicles saves 11.45+ pounds from the vehicle and improves exhaust flow and power by replacing the factory headers, center muffler, side mufflers, and air box.
Fabspeed's 991 Carrera performance package replaces the restrictive OEM side mufflers and center muffler for a deeper, throatier exhaust note and improved power and throttle response. the included sport headers replace the restrictive factory headers and cats with high-flowing performance headers and 200-cell hjs sportcats. lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power a...(choose a part on the right to read more)
General Fitment 911 2009-12
$9,227.59
Make a selection
Product details: dramatically improve mid/high end power by replacing the catalytic converters with a free-flowing x-pipe while adding aggressive sports car sound and throttle response; recommended for track and off-road use only.
Note: the cat bypass x-pipe provides dramatic power increases in the mid to high end of the rpm range. street drivers may notice a small torque loss at low rpm, which is why we recommend the sportcat x-pipe for street applications. please also bear in mind that this system does not include catalytic converters, so the check engine light (cel) will most likely be triggered. This is not an indication of any actual issue with the engine, and does n...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 1998-05
From $1,295.00
Make a selection
Product details:
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design.
Features:
-fits all Porsche 996 Carrera vehicles 1998-2005
-increases horsepower and torque by 8 whp and 16 ft-lbs
-saves 21 lbs from the rear of the vehicle
-dramatically reduces backpressure and improves exhaust flow and sports car sound
-includes fabspeed's deluxe quad-style tips available in polished or black chrome. Please indicate your year when ordering.
-direct replacement for the factory mufflers; compatible with the factory OEM cats or fabspeed’s sportcat or cat bypass ...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,895.00
Make a selection
Product details:
Increase horsepower, torque, and distinctive Porsche flat 6 sound by replacing the factory catalytic converters with fabspeed's high-flowing 200-cell hjs sport catalytic converter x-pipe.
Features:
-fits all Porsche 996 Carrera vehicles (1998-2005)
-greatly improve horsepower and torque by 25 whp and 32 ft-lbs
-saves 11 lbs from the rear of the vehicle
-proprietary investment cast x with tuned window was dyno developed to deliver huge mid range torque and high rpm horsepower gains
-x-pipe design includes integrated 200-cell hjs sport catalytic converters for maximum flow, efficiency, all while being able to pass tail pipe emissions tests (will not ...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
$2,295.00
Make a selection
Fabspeed's 996 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motorsport headers. lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power and sound.
Includes:
Maxflo performance mufflers
General Fitment 911 1998-05
$8,839.13
Make a selection
Bolt on application that works with the stock catalytic converters or aftermarket high flow cats. Available in both tÜv (quieter) and export (louder) sound levels. Features dual 4 inch (100mm) round end tips for much more aggressive look than the factory GT3.
Note: requires the use of a 997.1 GT3 rear bumper and heat shields available separately.
The following parts must be specially ordered:
- OEM 997 GT3 rear bumper
c2/c2s (europe part number 997 505 411 93)
(usa part number 997 505 411 94)
C4/c4s (europe part number 997 505 411 95)
(usa part number 997 505 411 96)
- heat protection part number 997 505 811 90
Fits: Carrera 4s, 3.8l, 261kw (05-08), Carrera 4, 3.6l, 239kw (05-08), car...(choose a part on the right to read more)
General Fitment 911 2005-08
$3,598.70
Make a selection
Fabspeed is one of the top fabricators of aftermarket parts. With the introduction of Porsches new production line model of the 997 Carrera it was short after that manufactures such as fabspeed to take this new model into unseen performance. The x-pipe sportcats is made from high quality t304 ss c.n.c. Mandrel bent tubing for maximum exhaust flow.
Key features:
Fits all 997 vehicles 2005-2008
997 sports racing catalytic converters give a horsepower and torque gain to all 997 cars.
High flow sports racing catalytic converters for less restriction and more power and more sports car sound. Fits all cars worldwide. Porsche factory warranty.
Simple bolt-on direct replacement sports cats fo...(choose a part on the right to read more)
General Fitment 911 2005-08
From $2,295.00
Make a selection
Louvers slats they are such a unique feature, so important. By opening the front fenders, and allowing the hot air from the brakes to get ventilated out of the wheel arch! To mount on top or bottom of the exist front fender. For all Porsche 997 Carrera | s | 4s | GTS | GT3 | targa | turbo s | GT2 | GT2 rs | sport classic
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
For all Porsche 997 Carrera models with the standart front bumper! The mounting is very easy. With some screwing points under the Porsche front bumper. Not for models with the aerokit or turbo | GT2 | GT3 front bumper
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,042.80
Make a selection
Side skirts set tradition rs our side skirts are much wider than the stock components, which leads to a wider underbody and thus to more downforce. The mounting is very easy. Plug&play at the OEM screwing points. For all Porsche 997 Carrera with the (c4) wide body | 4 | 4s | GT2 rs | GT3 rs | turbo
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,075.80
Make a selection
For all Porsche 997 Carrera models with the standart front bumper! The mounting is very easy. With some screwing points under the Porsche front bumper. Not for models with the aerokit or turbo | GT2 | GT3 front bumper
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Rear diffuser for all Porsche 997.1 Carrera models. The mounting is very easy. Plug & play with 3M double tape and 2 screws on the screwing points. Not for models with the turbo | GT2 | GT3 rear bumper
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,312.30
Make a selection
Side skirts set tradition rs our side skirts are much wider than the stock components, which leads to a wider underbody and thus to more downforce. The mounting is very easy. Plug&play at the OEM screwing points. For all Porsche 997 Carrera with the (c2) narrow body | 2 | s | GT3.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,133.00
Make a selection
If you find your Porsche 996 Carrera cabriolet rear end is a little plain, then you might want to consider adding one of these precision Porsche GT3 style rear spoilers designed specifically for the cab. Designed off of the original GT3 spoiler, this composite fiberglass part has been altered to let the cabriolet mechanical parts open and close without interference. It is a full replacement of your decklid and hydraulic speed actuated rear spoiler. To ensure you have no warning light on your dash, you will have to buy the GT3 spoiler wiring harness or deactivate it using a Porsche piwis or durametric tool. The GT3 style wing comes unpainted. They are a direct fit to your factory hinges and retain your intake sn...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,883.25
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|